Accessories

How Often Should You Clean Your Lens Or Camera Sensor?

Cleaning your camera and the lens is a very important part to take care of your equipment and it helps to produce a good quality picture consistently. Even small fingerprint on the front glass of the lens can impact on the quality of the photos. How often should you clean your lens and the camera? It all depends on how often you shoot and where do you shoot. For example, if you shoot a lot in a beach area where sands and dusts are present, you may have to clean your lens for every next shot and your camera sensor more often than people who shoot inside the studio. It’s very strange to accept the fact that lots of photographers who own an expensive lenses and camera body never pay an attention on cleaning their tools which help them capturing stunning photographs. If we take good care of equipment, our equipment takes care of us. Personally, I clean up my equipment every time I come back from the shooting and before storing it to dry cabinet. It is also very common for photographers to use an UV filter in front of their lens so that the actual lens won’t get accidental scratch and they don’t have to clean their lens every time and just cleaning an UV filter will do the job.

Lens cleaning kit

Lens cleaning kit

You can use a microfiber towel to clean the lens body and the front glass which doesn’t leave a residue on the surface. Don’t try to clean your lens or camera sensor with a rough surface material like normal towel or napkin paper; you may permanently scratch the front glass of the lens if you use hard surface material. I don’t recommend cleaning your sensor unless it is covered with the dusts and you are experiencing a problem with the image quality. Cleaning image sensor by yourself without having proper knowledge may destroy your camera permanently. Some DSLRs (Nikon D90 for example) come with an option that will lock the camera mirror up and allows you to clean the sensor using a blower or other cleaning tool provided by the camera manufacturer or the other individual company who produces quality accessories for DSLR.

If you go to the SETUP MENU by using the MENU button on the back of your D90 or other model DSLR, you will see an option called “Lock mirror up for cleaning” which is specifically designed for the photographers to clean up the sensor if in case there is a dust. You can use this option to raise the mirror up and open the shutter so that you will have access to the sensor for cleaning with a blower, brush, or swab as shown in the picture above. You can find those lens cleaning kit online for $20 or less. Nikon D90 allows you to use this feature only when your camera has a fully charged battery or sufficient battery for the cleanup because you don’t want the camera power to fail while you are still cleaning your sensor.

Polarizing Filter Vs Neutral Density Filter

A Polarizing filter (usually circular) is mainly used to reduce the glare or reflections from non-metallic reflective surfaces like water or glass. It also reduces the exposure but mainly used to saturate the colors and enhance the clarity of image. It works best when you are right angle to the sun light. Polarizing filters are not normally used for a wide-angle shot that includes the sky, as you'll get a very uneven sky tone due to the wide range of angles of the light entering the lens. Neutral Density (ND) filter is used to reduce the overall exposure uniformly giving an uniform reduction in light across the frame without affecting the color. ND filter is commonly used in a situation where it is bright sunny light and using a wide aperture to get a shallow depth of field would result into overexposed image. It is probably more popular to use when you want to use the slow shutter speed to get the cloud effects or milky effects of the water with a long exposure which could possibly overexpose your image without using ND filter.

Read More

Manfrotto 055XPROB Pro Tripod And Manfrotto 498RC2 Ball Head

When I bought my first tripod about two years ago, I didn't care too much about the quality. I was rather focused on the price and got fairly priced tripod for around $50. My first DSLR was Nikon D60 which I bought with the kit lens and I was not having problem using that tripod with the D60. But when I upgraded my camera to Nikon D90 with a bigger lens, 18-200mm VR II, I felt the need for a sturdy and strong tripod to hold the camera (and the lens attached to it) without worrying about it falling off the tripod. I have had a bad experience (tripod legs fell apart) with my previous cheap tripod when I was shooting July 4th fireworks in New York city.

Manfrotto 055XPROB Tripod Legs

Manfrotto 055XPROB Tripod Legs

After doing some research and reading online reviews, I bought Manfrotto 055XPROB Pro Tripod with Manfrotto 498RC2 Ball Head. I could go with Manfrotto 190XPROB 3 Section Aluminum Pro Tripod and 498RC2 ball head but I felt like to go one step up just to be safe for the future gears. Manfrotto 055XPROB Pro Tripod shares all the features with Manfrotto 190XPROB 3 Section Aluminum Pro Tripod but the 055XPROB is a more sturdy, heavier and a little taller than the 190XPROB. When you are not doing photography, you can actually use the 055XPROB for the weight lifting purpose as well. I guess little bit of humor doesn't hurt, and in fact, we all need it as a daily dose.

Let me summarize the basic differences between the 055XPROB and the 190XPROB.

Manfrotto 055XPROB Vs Manfrotto 190XPROB

1. Weight Support

055XPROB - Supports up to 15.4 pounds

190XPROB - Supports up to 11 pounds

2. Base Area

055XPROB - Leg diameters 29.4, 25, 20 mm

190XPROB - Leg diameters 25, 20, 16 mm

3. Height

055XPROB - Min/Max. height 3.9"/70.3"

190XPROB - Min/Max. height 3.3"/57.5"

4. Weight

055XPROB - Weighs 5 pounds

190XPROB - Weighs 4 pounds

Both gears are designed with the same basic principles and share common features like extending the center column and fold to make a horizontal arm and both are made out of solid aluminum material.

Manfrotto 498RC2 Ball Head

Manfrotto 498RC2 Ball Head

Manfrotto 498RC2 Ball Head works great with both tripods and gives an extra feature to those photographers who love to shoot panoramic shot using horizontal pan (Manfrotto 496RC2 Ball Head lacks this feature).

This ball head has been totally redesigned for better ease of use. A newly designed friction control knob allows the photographer to achieve superior control when handling the camera and making micro movements without having to totally lock and unlock the ball head. The knobs have been redesigned to be more ergonomic, easier to handle and more user-friendly. The ergonomic shape allows the user to better lock the ball securely. A re-positionable locking lever allows the user to place it in a comfortable position in order to use it in the most convenient way; just pull it outwards, put it in the best working position and then release it. This model features a RC2 quick release plate including an additional safety system that prevents the accidental detaching of the camera from the head. The locking lever securely locks the head both in the +90°, -90° ball positioning and in the 360° pan movements for panoramic shot or even getting panning effects. With solid aluminum construction, this head is the ideal support for all the traditional or the digital small or medium format cameras weighing up to 17 pounds.